AVM FRITZ! Repeater Installation as a mesh repeater is very simple: Briefly press the red Connect button on the front. Then walk to the FRITZ!Box and press the Connect button there as well. After that, both devices are linked to each other.
This means that with such a mesh connection, the FRITZ!Box automatically sends all relevant WLAN settings to the repeater, such as the WLAN network name alias SSID, WLAN key, WLAN guest network, and also the WLAN timer, if it has been activated.
The FRITZ!Repeater 6000 can be easily connected to all newer FRITZ!Boxes: Press the red Connect button on the left side of the repeater and the white Connect button on the right side of the Fritzbox: Shortly afterwards, both radios are mesh-connected.
Here, the Fluke Networks MicroScanner PoE attests that the AVM FRITZ!Repeater 6000 has a speed of 2500 Mbps.
The upper FRITZ!Repeater 6000 is connected to the FRITZ!Box 6660 via WLAN and mesh. The lower one is connected via LAN cable and without mesh.
AVM FRITZ! Repeater Picture gallery with 9 pictures
This works best within the FRITZ! family. It is usually a Malaysia Phone Number List bit more difficult with third-party devices. Often, some of the WLAN settings are not fully passed on to third-party devices and you have to reconfigure them manually.
In mesh repeater mode, the FRITZ!Repeater 6000 uses its third radio module for the infrastructural radio connection to a FritzBox. Some manufacturers would already call this a tri-band mesh system. But it is actually a dual-band system, because it only operates in the 2.4 and 5 gigahertz bands.
Tri-Band Mesh from Wi-Fi 6E
The true tri-band systems will arrive towards the end of 2021 and will also be able to transmit and couple in the 6-gigahertz band. The German Federal Network Agency (BNetzA) published a general allocation for this on July 14, 2021: “Private individuals, businesses and other institutions benefit from the additional WLAN frequencies cell phone number listing in the 5.945 GHz to 6.425 GHz range through higher data throughput and more stable connections for high-bit-rate applications such as video telephony, gaming or streaming,” says the BNetzA.
And can AVM also enable the FRITZ!Repeater 6000 for the 6-gigahertz band via software? “No,” says AVM when asked: ” Wi-Fi 6E requires new hardware.”
The multi-gigabit LAN socket
The FRITZ!Repeater 6000 has a normal 1-gigabit LAN socket. It also has a multi-gigabit LAN port . This can be set to 10, 100, 1,000 and 2,500 megabits. This is the first time that AVM has Bulk Database implemented this on a repeater. Otherwise, the Fritzbox 6660 Cable was the first AVM WLAN router with a 2.5 GbE port.
WiFi-6 in three frequency blocks
The biggest highlight is certainly the WLAN equipment: In the 2.4 GHz band, AVM promises 1200 megabits gross. In the 5 GHz band, 2x 2400 megabits are promised, namely in the lower and middle bands. If you add these three speeds together, you get 6000 Mbps. And that’s exactly why it’s called AVM FRITZ!Repeater 6000.
